Share This Article
There’s something in the air, and it’s not good. The word “calibration” is thrown around a lot these days, and it’s a buzzword we hear a lot. But what does it mean? When you calibrate a device, you’re actually adjusting how it works and how it works better in the future.
A lot of people use the word calibrate to describe calibrating a camera lens. Basically, you are adjusting the focus of that lens, which allows you to obtain a higher field of view. This is a common technique for taking pictures, but it is also used to adjust how well a lens works with different cameras. It’s kind of a “tweak” of the term.
With the advent of new calibration technologies, like the one that has just been released by one of the biggest players in the space, Canon, the term has become so much more complicated. It has a whole new meaning. And the term is also more precise. It means something that is extremely precise and only works with a specific brand of camera.
Canon offers a new technology called digital image metering, which is essentially a new way of taking pictures that involves the camera detecting a change in the light that’s hitting your lens. This technology is extremely precise. Not only does it work with all Canon cameras, but it also works with cameras from Nikon, Canon’s rival, Panasonic, and Sony. It is the only digital metering technology that work with three of the biggest imaging companies in the world.
That’s cool (and here’s a little side-note about metering, which often gets a bad rap). It’s important to note that metering isn’t really that accurate. It’s just that the camera’s automatic settings (which usually have a target value of about five to 10 feet) are not calibrated in relation to the ambient lighting.
Its important to remember that most cameras have a “target” value of about five to 10 feet. The ambient light in a room is usually much brighter than that, so the camera will automatically adjust its settings to compensate for the higher than normal ambient light in a room.
So you’ll need to have your ambient lighting calibrated. You can either do this yourself, or at least hire someone to do it. Because as important as it is to have your camera calibrated, it’s not really an accurate way of determining the amount of light in a room. A better way is to use a light meter.
A light meter is essentially a video camera. They are cheap, and easy to use with a little bit of computer power. The problem is that they are not accurate in most cases. A light meter isn’t going to tell you what the amount of light in a room is going to be in 2D, but it will tell you what the amount is going to be in 3D.
The easiest way to really see what a light meter is going to do is to look at a white board and see how many pixels you are going to put into your room. You can then use that number to determine how many pixels your camera (your light meter) is going to be able to capture.
This is a problem because many people are not using lights correctly. The typical model of a light meter is to use two cameras and a light sensor. The camera captures the image, then the light sensor is used to detect the amount of light in the room. The problem is that this is not always accurate. Sometimes the light sensor will get confused and try to measure an area that is really dim. This can be fixed with calibration technology.